> Orion version 1.366 firmware is on the website:
> http://www.rfsquared.com/
Oh my, something new to fool around with!
"
DSP Filter Control
User settable DSP Filter Tap Length control was added to
the Orion in Firmware Version 1.366. Adjusting the DSP
Filter Tap Length directly affects the sharpness of the skirts
on the associated DSP filter. The Greater the number of Taps
in the DSP filter, the greater the sharpness of the filter skirts.
This can be thought of as a DSP filter slope control with a
range of 33 to 199."
Default seems to be at 199, which is the most sharp filter
skirt. Lower numbers "soften" the skirts.
73, Jim KH7M
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|