In late September Gary (VE7GGJ) encountered a transmit problem with his
Ten-Tec Jupiter. With some troubleshooting assistance from Bill (W4NJF) the
rig has been repaired. The problem was a faulty relay on the Low-Pass
Filter Board.
For those interested I have posted a description of the diagnosis and repair
procedure on my website.
Enjoy.
73,
Rick
VE7ASR
Website: http://www3.telus.net/ve7asr
> -----Original Message-----
>>
> To: tentec@contesting.com <mailto:tentec%40contesting.com>
> Subject: [TenTec] Jupiter - No Transmit Power on 15 and 17 Meters
> From: Gary Jacek VE7GGJ
> Reply-to: tentec@contesting.com
> Date: Mon, 29 Sep 2003 08:03:35 -0700
>
>
> I have discovered that my Jupiter no longer transmits on 15
> and 17 meters.
> All other bands are working fine. On 15 and 17 the TX and
> ALC lamps are
> illuminated, but power out measured on both the Jupiter
> display and the
> AT-11MP is zero. I have tried a master reset but it makes no
> difference.
> Time to get on the phone to TenTec? 73 de Gary VE7GGJ
>
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|