TenTec
[Top] [All Lists]

[TenTec] Orion Prog AGC Threshold

To: <tentec@contesting.com>
Subject: [TenTec] Orion Prog AGC Threshold
From: "Marijan Miletic, S56A" <s56a@bit.si>
Reply-to: tentec@contesting.com
Date: Mon, 5 Jan 2004 11:36:19 -0000
List-post: <mailto:tentec@contesting.com>
My reasoning mistake as I stayed in the loop due to high possible AGC
threshold of 200 uV.
This is some 60 dB of linear gain on 0,2 uV but it can be achieved with
analog circuits.

I can see now more Orion problems in the digital domain :-)

73 de Mario, S56A, N1YU

I can assure you, Carl is right Mario.  Preamp on/off certainly affects
S-meter reading but that's nothing to do with the AGC threshold control.

73

Bob, 5B4AGN, P3F


Marijan Miletic, S56A wrote:

>N4PY> The AGC threshold control does not change the S meter reading.
>
>I very much doubt that as S9 input voltage changes with preamp.
>Circuit diags don't help much as meter is controlled by DAC.
>

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>