TenTec
[Top] [All Lists]

Re: [TenTec] BPL Update

To: tentec@contesting.com
Subject: Re: [TenTec] BPL Update
From: Duane A Calvin <ac5aa@juno.com>
Reply-to: tentec@contesting.com
Date: Wed, 14 Apr 2004 11:46:45 -0500
List-post: <mailto:tentec@contesting.com>
Please, not on the TT reflector.  Whether we agree or not on this one, it
is clearly tangential at best to Ten-Tec.  Start a different reflector
for this discussion!

        73, Duane


On Wed, 14 Apr 2004 16:37:00 +0000 ac5e@comcast.net writes:
> Steve, it seems to me the Ten Tec forum is as appropriate as any. If 
> no one has a job nobody buys radios. And if wages go way down 
> companies that make radios in a country where a plant supervisor 
> makes the equivalent of $8,000 a year have a crushing price 
> advantage. 
> 
> But bluntly, given an even playing field we can compete with anyone. 
> Our misleaders have been cozying up to countries that are 
> essentially waging economic war against us. An artificially low 
> exchange rate amounts to a high protective tariff against foreign 
> products - and at the same time amounts to a subsidy for their 
> exports. So we are priced out of their market - and they can even 
> price us out of our market. 
> 
> The result is economic warfare. The eventual victory occurs when the 
> winner can buy the loser. Neat, sweet, and no blood shed. 
> 
> The solution? According to some of Washington's outs who want to be 
> in again, the solution is to make their wages the same as ours. How? 
> The only way possible is to drop our average worker's wages to their 
> level, by further devaluing the dollar and by other means. Do you 
> really want to make coolie wages. I don't think so.   
> 
> Don't misunderstand me. I'm a LIBERAL - and have been since I handed 
> out flyers and cheered by the tracks for "Give 'em Hell" Harry 
> Truman. But I have absolutely no sympathy for the media and 
> entertainment industry "Elite" who have taken over my political 
> party, most corporations, and our labor unions. 
> 
> I think the Elites who have exported our technology and our jobs to 
> further their political interests have committed nothing more or 
> less than treason. And their fellow travellers are just as guilty, 
> whether they sit in an editors chair, a boardroom, a union hall, or 
> a legislative body. 
> 
> 73  Pete Allen AC5E
> 
> 
> --
> You know what they call a cowboy who does not picket his horse?
> 
> Afoot! 
> 
> 
> 
> > Pete,
> > 
> > I understand your plight.  Competing against cheap labor in China 
> is 
> > nearly a losing battle, especially when American companies no 
> longer 
> > consider themselves to be American companies, but rather 
> > multinationals.
> > 
> > Treason can be defined as giving defense secrets to other 
> countries 
> > under false pretenses, but in today's climate, dismantling the 
> only 
> > non-asian manufacturer capable of producing a critical, 
> irreplacable 
> > guidance system component for our key weapons systems is simply 
> > considered to be good business practice, not treason.
> > 
> > Run a google search on the words MAGNEQUENCH and CHINA to learn 
> about 
> > what many consider to be the worst example yet of an American 
> company 
> > engaging in treason. A keyword search on MAGNEQUENCH at the 
> > insightmag.com website will turn up three articles that may make 
> your 
> > skin crawl. http://www.insightmag.com/main.cfm?include=search
> > 
> > I applaud you for your efforts to stay American!
> > 
> > Thank you Pete!
> > 
> > 73 de KD9BO Steve
> > 
> 
> > ps: before anyone flames me for going off topic, please do the 
> search 
> > and read the links.  Then write to your Congressmen and Senators 
> in 
> > outrage.
> > 
> > 
> > 
> > >Well, said, Doc. I'm a manufacturer in a small industry who has 
> > >watched most of my competition go "offshore" because of the 
> utterly 
> > >reckless actions of a relatively small number of political 
> > >appointees. And when you want to place blame for offshoring, do 
> the 
> > >arithmetic. Then do the research.
> > >
> > >It takes three to five years between the boardroom decision to 
> move 
> > >a plant until enough product has made it onshore to start issuing 
> 
> > >layoff slips. Who was in office three to five years ago? What 
> were 
> > >the policies that made major employers look overseas? Why were 
> those 
> > >policies in place? And why did the then administration fail to 
> > >address those policies?
> > >
> > >The people we elect haven't a clue about what's going on - unless 
> we 
> > >tell them. And even when we tell them, forcing a bureaucrat to 
> 
> > >reverse course takes an act of Congress. A few who serve "at the 
> 
> > >will of the President" can be removed - provided said crony does 
> not 
> > >provide enough money to the incumbents
> > >re-election campaign, or to the financial markets, to make in 
> > >inconvenient to tie a can to his tail. And provided the 
> appointees 
> > >actions do not represent the political philosophy of the 
> President.
> > >
> > >All in all, the Founders - and Plato - gave us a wonderful system 
> of 
> > >government. And what we have now is the fruition of a 227 year 
> long 
> > >scheme to subvert that system. In large part by exporting the 
> very 
> > >foundation of our success and our economy - our jobs and our 
> > >technology.
> > >
> > >73  Pete Allen  AC5E
> > >
> > >
> > >
> > >   In this election season where everything seems to be presented 
> or
> > >>  interpreted as having partisan purpose we seem to find 
> ourselves
> > >>  parsing every word.  An after-effect, I suppose, of the 
> Clinton-Gore
> > >>  years when all of we non-lawyers learned about new word games 
> like
> 
> > >>  "It depends what your definition of is is." and "There is no
> > >>  controlling legal authority."  Sigh.
> > >>
> > >>  So that we might address our E-mails, letters, and phone calls 
> to
> > >>  the correct individuals can you specify precisely whom it is 
> in
> > >>  this administration you know with certainty to be "highly in 
> favor
> > >>  of BPL", please?
> > >>
> > >>
> > >>  Generalizations work against us in this campaign to inform 
> the
> > >>  uninformed and to derail this RFI trainwreck, only specifics 
> are of value.
> > >>
> > >>  IMHO, YMMV ...
> > >>
> > >>  --
> > >>  Thanks! & 73, doc kd4e
> > >>  West Central Florida
> > >>  Op. Atlas, Drake, Hallicrafters, TenTec ...
> > >>  p.s. Linux-incompatible hardware is defective!
> > >>  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > >>  _______________________________________________
> > >>  TenTec mailing list
> > >>  TenTec@contesting.com
> > >>  http://lists.contesting.com/mailman/listinfo/tentec
> > >
> > >_______________________________________________
> > >TenTec mailing list
> > >TenTec@contesting.com
> 
> > >http://lists.contesting.com/mailman/listinfo/tentec
> > 
> > 
> > -- 
> > Steve Weber
> > 
> > 
> > No trees were killed in the sending of this message. However
> > a large number of electrons were terribly inconvenienced.
> > 
> > *******************************
> > 
> > Hey spammers - Harvesting email addresses? Don't overlook these 
> guys!
> > 
> > FCC Chairman Michael K. Powell: mpowell@fcc.gov
> > FCC Commissioner Kathleen Q. Abernathy: kabernat@fcc.gov
> > FCC Commissioner Michael J. Copps: mcopps@fcc.gov
> > FCC Commissioner Kevin J. Martin: kjmweb@fcc.gov
> > FCC Commissioner Jonathan S. Adelstein: jadelste@fcc.gov
> > 
> > US Postal Service: customer@email.usps.gov
> > Fraud Watch: fraudinfo@psinet.com
> > Federal Trade Commission: consumerline@ftc.gov
> > Federal Trade Commission: uce@ftc.gov
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 


Duane Calvin, AC5AA
Austin, Texas
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>