TenTec
[Top] [All Lists]

Re: [TenTec] Adding a frequency counter to the Argo 509 ie: SWL Freq

To: tentec@contesting.com
Subject: Re: [TenTec] Adding a frequency counter to the Argo 509 ie: SWL Freq
From: <nz7c@cox.net>
Reply-to: tentec@contesting.com
Date: Fri, 25 Jun 2004 12:36:00 -0400
List-post: <mailto:tentec@contesting.com>
Frank -
You might want to call Marshall Emm at Morse Express (se his website) and ask 
about his digital readout DD-1. I used one and they are excellent. You can also 
set them to run with multiple radios.
73/Tim NZ7C
============================================================
From: Frank Sanfilippo <wb2tdt@yahoo.com>
Date: 2004/06/25 Fri PM 12:30:23 EDT
To: tentec@contesting.com
Subject: [TenTec] Adding a frequency counter to the Argo 509 ie: SWL Freq
        Mite

Hi everyone,
I have an Argo 509 i just blew the dust off of recently and its been working 
well but I would really like to add a frequency counter to the rig preferably 
one that outputs the freq in CW injected into the audio stage.
I was told by Ten tec that this cannot be done due to the type on conversion 
scheme the 509 uses, however I see posts in the archives where other Hams equip 
their 509's with digital frq. readout. If anyone is familiar with doing this I 
would greatly appreciate hearing from you.
I have the SWL Freq Mite and I have no idea where to pull the RF from for it to 
read. I can select pretty much any IF freq with it but really am not sure how 
to do it if it can be done.
Thanks in advance, 
Frank WB2TDT

                
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
============================================================


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [TenTec] Adding a frequency counter to the Argo 509 ie: SWL Freq, nz7c <=