Re: [TenTec] Omni D - which type?

[burro5944@bellsouth.net]

All you super TenTec RZ-32D  geniuses please help me I seem to lack the 
ability to receive anything but the strongest of stations with S7-S9 
levels of noise. I have placed the receiver away from the PC I have 
tried the supplied rod antenna longwire an active antenna in fact three 
brands SONY DATONG VECTRONICS and a Torus loop made by Ed I forgot his 
last name but he was very ill and may no longer be with us. If so a 
great loss.
Anyway open for suggestions Have also tried 4 types of software 
including the one supplied by TenTec marginal but functional should at 
least be able to her the Big boys.
Barry
WB6ldl

Werner 'Joe' Jochem DK7VW wrote:

> Two days ago I purchased an Omni D - S/N 546-2280. Since the vendor didn't
> provide an Owner's Manual I tried to find one via internet.
> On www.qsl.net/tentec I found the different types of Omni D (546, 546B,
> 546C) and downloaded the manual for the 546 (the only one available there).
> Looking at the pictures showing the front panels of the different Omni types
> and the downloaded manual I have to confess: I am confused. My Omni doesn't
> match to any of the shown types, ups ...
>
> 1. The selectivity is chosen by a rotary switch with four positions: CW-1,
> CW-2, CW-3, SB.
> 2. There's no notch filter, but a squelch knob (with on/off function)
>
> Any idea which type of Omni D I purchased and where I can get the
> appropriate owner's manual? Many thanks!
>
> 73 Joe DK7VW
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>