If you're talking about the outer cover, it's a #10 Torx - the pack if
hardware with the rig has a little "allen wrench" sized version of one.
I bought a real driver - makes it a lot easier to use.
73, Duane
On Wed, 4 Aug 2004 10:18:46 -0400 "Larry Emery" <k1uo@uninets.net>
writes:
> Tom, all,
>
> The lamp strip worked fine for a year...now it cant decide
> whether it wants to be full on, on only dimly, fully off or
> constant
> variations of on/off! FYI: Power supply is a 35 amp Astron and
> the
> lamp strip goes through its jyrations with the rig just sitting in
> receive mode. I'm sure no-one else is having this problem and it
> just may be a loose connection somewhere...at least nothing else is
> affected that I know of.
> Anyone know the exact tool size required to remove the "special"
> cover
> screws?
>
> Thanks,
> Larry K1UO
>
>
> ----- Original Message -----
> From: "Tom Whiteside" <tomw@ecpi.com>
> To: <tentec@contesting.com>
> Sent: Wednesday, August 04, 2004 9:45 AM
> Subject: Re: [TenTec] ORION S/Power meter
>
>
> Curious - mine does not flicker at all as far as I can detect?
> Wonder if
> your power supply is sagging?
>
> Tom Whiteside
> N5TW Georgetown, TX
>
> From: "Larry Emery" <k1uo@uninets.net>
> Subject:
>
> Which board controls the S/Power meter lamp strip?...the constant
> flickering
> on/off of the strip is starting to really bug me!
> Thanks
> Larry K1UO
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
Duane Calvin, AC5AA
Austin, Texas
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|