>On my IC-706 mobile rig, the front panel is detachable and everything can be
>connected and controlled from the remote front panel - except the paddle.
Hi Rick,
Happily that's not true!
You can use the mic connector on the detachable front plate, as the
keyer input. I snagged some scrap network cable , lopped off the end
and connected my paddles that way. Works fine (and it's documented
although not obvious, in the manual).
73 es good luck
John K5MO (IC706 CW mobile)
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|