Skip,
I had a similar problem when I was cycling audio routing options after
selecting binaural rx. I found that I could restore audio by turning bin rx
back on then turning if off.
73,
Mark
----- Original Message -----
From: "skip" <k3cc@fast.net>
To: <tentec@contesting.com>
Sent: Monday, September 20, 2004 7:13 PM
Subject: [TenTec] rcvr/no audio
> This is the first weekend I have had the time to play with my Orion.
> After having the sweep on and listening to the Orion and FT 1000MP Mk/V
for
> a few hours the Orion audio quit.
>
> I could see movement of the S meter and a hum from the audio but no
> intelligibility.
> I turned off the Orion and it worked fine for another 2 hours and the same
> thing happened.
>
> WHY !!!!!!!!!!!!!!!!!
>
> This is supposed to be a contest grade radio,. which means hours of use.
> It's useless if it only works for a few hours.
>
> de Skip K3CC
>
> I'm trying to be constructive, however this radio has problems that should
> have been addressed before I got my hands on it.
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|