John Gabbard wrote:
Doc, check and see if there is an internal fuse in the rig. then check to
see if you are getting power to all boards. There may be a diode for
reverse voltage protection also,should be on your schematic, look around
the entry of the 13.8 voltage.John KF7OM
I don't have the schematic, I do have one on the way via snail mail.
I have also contacted TenTec about a complete manual but haven't heard
back ... they've been a bit bust there this weekend I hear!
Have to dodge another hurricane now but hopefully will have phone
service after Jeanne passes and will be back on the list.
--
Thanks! & 73, doc kd4e
West Central Florida 100% Linux. Suse 9.1
Drake, Hallicrafters, Heathkit, TenTec, Yaesu
Radio Life: http://www.gospelcom.net/twr/
Linux-Incompatible hardware is defective!
USA Pres. Election 2004: http://www.rnc.org/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|