Hello Rick... What value are the feedback caps? Mine are .0022, and the
output from each section is through a .1uf cap. The first and last sections
also
have a resistor to ground at the output of the .1uf cap. For some reason,
the 2 middle output caps don't have the resistor.
If you can span the pic, that would be great.
Thanks,
Joe
In a message dated 11/22/2004 2:56:03 PM Central Standard Time, Rick@DJ0IP.de
writes:
I found the schematic of the model 224 Audio Filter for the Argosy.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|