TenTec
[Top] [All Lists]

Re: [TenTec] Orion display questions

To: <tentec@contesting.com>
Subject: Re: [TenTec] Orion display questions
From: "Steve N4LQ" <n4lq@iglou.com>
Reply-to: tentec@contesting.com
Date: Sat, 4 Dec 2004 10:59:39 -0500
List-post: <mailto:tentec@contesting.com>
There are no "burn in" problems with LCDs. Life expectancy has improved and the modern TFT type display's backlight should last over 30,000 hours. A screen saver would obviously reduce the usage of the backlight and give you more years of service but there is the unknown factor of repeatedly switching the backlight on and off. 30,000 hours is less than 4 years. Using the rig 5 hours per day should yield about 16 years before it begins to go dim.
The display in the Orion is older technology and may give different results than the newer TFT type display in the Icom rigs.
The main enemy of LCD backlights is cold temperature. Operating the display in temperatures less than 45F could shorten it's life to as little as 3,000 hours.
Where I work, we have hundreds of laptops and generally the display failures are related to physical abuse, dropping, running over with cars etc. We have had only a handful of actual LCD failures due to backlight problems.
Chances of LCD failure are far less than damage due to static electricity from the antenna. I think ESD is probably the number one enemy of ham equipment these days.
If I were you, I would base my decision on other factors. The LCD life thing just isn't much to worry about. The information that is displayed and it's appearance is of greater importance.


Steve N4LQ
----- Original Message ----- From: <KD7EFQ@aol.com>
To: <tentec@contesting.com>
Sent: Saturday, December 04, 2004 8:57 AM
Subject: [TenTec] Orion display questions



Hello all, I'm still doing my research on my next rig purchase and have
another question for Orion users. Lately, I'm hearing about display problems /
failures of the IC pro II series. Is the monochrome display in the Orion less
prone to display failures & burn in effect than the color displays on the Icom's?


I also see the new Pro III is including a screen saver feature for the
display, and my friend who is a computer technician said this is just a marketing
gimmick, as LCD displays don't really need a screen saver, and screen savers
were only needed on the old CRT displays.
Is this correct?


The more I hear, the more Orion moves into my first choice spot, even though
I really would prefer a color display. As always, your replies are appreciated.


73, Todd - KT0DD - kd7efq@aol.com
"The race is over...THE RATS WON !"
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>