Hey, Jim! Congrats on the new Paragon. I also have a 585 model and
absolutely LOVE it. Look around for the Giehl chip as it adds some nifty
functionality to the original Paragon, making operating it almost identical
to a Paragon II. Mine gets left off for a week when I travel, and has held
memories fine. I did have a quick drain situation when I added a voice
board, but it turs out there was a mod to fix that board which I did and I'm
not currently having any rundown battery problems.
The original versions used a standard alkaline 9v battery which lasted a
while, but an improvement was then made to use a rechargeable battery. Make
sure you have that mod, if from the factory there will be a sticker inside
warning you not to use only a rechargeable battery. You can also just leave
the power supply running, of course.
=Vic=
WA4THR
Greetings all..
Im sure this is a topic that has been covered before on the list, but
being a
newcomer to the group, I would like to ask.. I have recently bought a nice
"late model" Paragon 1, (ver. 4.0),with the 3 optional filters, and think
it is
just about the greatest CW rig ever made... a real joy to operate..
The only real problem I have had is that the memories were lost after
only
about 4 days of not using the rig.. I replaced the 9v. NiMh. batt, and ran
the
radio for several days to be sure the batt. would charge up.. If I were
not to
use the rig for 2 days or so, the memories would still be retained.. but
after
about 4 days of inactivity they were lost.. Is this a normal circumstance
with
the Paragon?
I have no optional boards in the radio except for the filters..
tnx..
73.. Jim K2NP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec