My stations power supply is always on.
Since I had to tweek the alc and agc pots as output was running about 60
watts max, I reseated all the cabeling on both the bottom and top of the
omni.
80 meters fired right up this morning...
However I would not rule out flakey contacts on the passband filter board
relays.
----- Original Message -----
From: "David S.McCallum" <w7sac2@cox.net>
To: <tentec@contesting.com>
Sent: Sunday, January 09, 2005 8:57 AM
Subject: Re: [TenTec] Omni VI plus quirk?
Denton, when you shut the radio off are you leaving the external P/S on?
Think I use to do that way my OMNI 6 a few years back but never ran
across a problem like yours, good luck and maybe try a Master Reset, 73
Mac
David S. McCallum/USAF RET./CMSGT/W7sac/4
----- Original Message -----
From: "denton" <denton@oregontrail.net>
To: <tentec@contesting.com>
Sent: Sunday, January 09, 2005 10:28 AM
Subject: [TenTec] Omni VI plus quirk?
Since I haven't gotten any other replies on this item, I am relisting
it..
I notice that my used (new to me) Omni VI Plus upgraded to option 3 does
not
want to do anything when I turn it on in the mornings, if left in 80
meters
at night, unless I push the 40 meter button....
It has a fresh battery.
Is this typical of this rig?? otherwise no other problems have
surfaced..yet.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/05
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/05
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|