Hi,
thanks to the newsgroup info here I've cured several faults on the much-abused
Omni-D I bought in June 04.
ALC non operation was traced to the 1N4148 diodes on SWR unit.
The radio now works as per handbook as regards o/p power and ALC operation.
Notch filter fault turned out to be a dry joint on the 12V supply line on the
board.
The remaining fault is a weird one,
with Drive and ALC controls at min, approx 10 Amps indicated on PSU current
meter
with mode switch in Lock position,
on CW key down,
on SSB if PTT operated to TX, or VOX operated to TX (Vox is very sensitive and
seems to trip on and off repeatedly when Vox gain up)
I would be grateful for any assistance on this fault, I would guess some sort
of oscillation occurring
thanks
Tony G3ZRJ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|