Hi Martin,
This is strange. Just checked mine again. Put the audio menu Left =
Sub and can vary the left aux output by using the SubRx AF control.
Put Left = MAIN or BOTH and vary the MAIN AF output and the left aux
output stays constant. With Left = MAIN or BOTH, changing SubRX AF
has no affect on pin 3 of the AUX I/O!!
Running 1.373 beta 5 so don't know if this is a new thing or not.
But regardless, since its called 'line' audio output, AUX I/O pin 4
and pin 6 audio output level actually should be completely
independant of what you do with the AF controls for either receiver.
It just does not work that way however!
Tom - W4BQF
----- Original Message -----
From: "Martin AA6E" <msembx-aa6e@yahoo.com>
To: <tentec@contesting.com>
Sent: Sunday, January 23, 2005 9:09 AM
Subject: Re: [TenTec] Orion AUX out audio question
Tommy,
My rig does not behave that way. Left=Sub produces constant
output
unless you zero out the Sub AF volume. (v 1.372) In that case the
aux.
output is blanked out.
Thinking about this a little more, I think the TT logic is just
wrong
for my use. I want the aux. output to be completely independent
of
front panel level controls. That's what "line out" normally
means.
This could be fixed in firmware -- and/or made a menu option.
73, Martin AA6E
--- Tommy <aldermant@alltel.net> wrote:
..however if you have
LEFT set for SUB, you can vary the audio level at pin 4 using the
SubRx AF control.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|