I have just released version 2.21 of my Pegasus/Jupiter/Argonaut
V/RX320/RX340/K2 program.
All current subscribers should now have the program.
Highlites of version 2.21 over version 2.20 are:
Version 2.21
1)
Added a little feature to allow direct frequency entry from the keyboard
if the CW keyboard is on. When you press the "enter" key first, you
are in direct frequency entry mode even with the CW keyboard turned on.
2)
Added the ability to use the Steppir antenna controller with radios
that Steppir does not support. This new feature allows a separate
comport to be used for Steppir. The new Steppir settings are in the
"Usr5 TrnsV, Steppir" settings window.
3)
There are now radio window button text font parameters in the pegasus.ini
file. They are called "Small Font" and "Micro Font". You may want
to make the button text larger if you use SCALEX and SCALEY to increase
the radio panel window size.
4)
Moved the CW keyboard memory edit boxes to the CW Keyboard window.
5)
Added the "Esc" key to get out of direct frequency entry mode if no
numeric keys have been pressed.
6)
Added Elecraft K2 DSP support from the program front panel. See
the "Interface" section of the N4PY Help file under "Elecraft K2" for
details.
7)
Improved band register button operation if the SWL band definitions
overlapped the ham band internal definition.
Carl Moreschi N4PY
Franklinton, NC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|