Not too familiar with the Centaur, but take a look at the plate voltage on
standby and then key down. On 110, it will probably drop 10% or so. The
drop WILL be less when you wire for 240. Now, if that makes any real world
difference or not....I doubt it. But, try getting that L7 or SB220 or TL922
to work on 110.....that's a whole different situation!!!
...Dave
----- Original Message -----
From: "Tim _W1WCI" <kb1gfv@arrl.net>
To: <tentec@contesting.com>
Sent: Sunday, March 06, 2005 7:40 PM
Subject: [TenTec] 110 vs 240
> Just added 240 volts to the shack.
>
> I am wondering if rewiring my Centaur for 240 volts would change or
> improve performance?
>
> If so I would love an explanation of the theory behind any improvement
> or efficiency.
>
> Thanks for any help.
>
> 73
> Tim
> W1WCI
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|