[TenTec] Help with RX320 Needed

["Dan Radcliffe" <kf9bp@netzero.net>]

I recently bought a used RX320 and did not not realize until it was too late 
that the power supply provided with the unit was not correct (the polarity was 
reversed).  After the smoke cleared I took the covers off and discovered a 
fried resistor on the lower board near the edge, next to a large electrolytic 
capacitor.  Can anyone tell me the value of this resistor?  I do not have a 
schematic.  Thanks.
Dan  W9RAD