TenTec
[Top] [All Lists]

[TenTec] Many TenTec items FS

To: "TenTec List at contesting (TenTec List at contesting)" <tentec@contesting.com>
Subject: [TenTec] Many TenTec items FS
From: "Ken Simpson, W8EK" <W8EK@speakeasy.net>
Reply-to: W8EK@speakeasy.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 22 May 2005 15:07:19 -0400
List-post: <mailto:tentec@contesting.com>
Many TenTec items For Sale:


Ten-Tec Pegasus Model 550 HF transceiver

Covers 160 thru 10 meters, although it can be used
with a transverter for 6 and 2 meters, and will display
the 6 or 2 meter frequency on the screen.

It will transceive SSB, CW, FM, or AFSK, and receive 
AM.  Of course it is also ideal for digital modes such 
as PSK31, pactor, etc.  It has 2 VFOs and 1000s of
Memories, and full break-in on CW.

This rig is very close to a "software definable" rig, in 
that most of the rig is controlled from the computer and 
computer program. There are no knobs on the rig.
Everything is on the computer screen.  It makes for
a rig that can be changed by changing the software.
DSP filtering is provided, that is quite effective, so
no crystal filters are needed.  Bandwidths go from
300 Hz to 8 KHz, with 1.5 to 1 shape factors, or better.

This particular unit is in excellent condition, with latest 
firmware. It looks and performs almost like new.  No 
scratches, dents, or dings.  TenTec operating control 
software is included in both 16 bit and 32 bit operating 
systems, so you can use an older version of Windows 
or the latest version.  Of course it has the power cord 
and complete manual with it.  It needs 13 V DC at 
about 20 amps to operate.  In its original box for $625


TenTec 555 Scout HF transceiver
This is a 50 watt HF transceiver, primarily designed
for mobile use, but also nice inside the house.  It
has the TenTec variable bandwidth "Jones filter" in
it that is really effective.  CW keyer is built in.
This one has the 40 and 20 meter modules with it,
along with power cord and manual.  It works fine, and
looks like it just came out of the box.  I can not find a
scratch any where on it.  $320


TenTec 705 desk microphone
This electret desk mic has the 4 pin connector,
with PTT and "hold" buttons.  It works great, and
looks like new.  With paper work for $75


TenTec 252 MO power supply, 20 amp, 13 V DC supply.
Matches the Omni series of transceivers.  It has an
ammeter on front. It works 100% and looks very good.
No scratches or imperfections. With manual for $ 110


TenTec 280 power supply, 20 amps at 13 V DC.
This supply is quite heavy duty electrically.  It has 2 pass 
transistors, instead of the one that some have.  It has an 
ammeter on it.  This one works fine, and looks very nice 
as well.  With paper work for $125.


TenTec 255 Deluxe Power Supply
Matches the early Omni series, and includes ammeter
and speaker, and trim ring. Dual pass transistors similar
to the heavy duty 280 power supply. Good for 20 amps
at 13 V DC. This one looks fine, and works the same. 
With manual for $ 145.


TenTec KR-50 keyer
The KR-50 is an iambic keyer that has adjustable weighting,
if desired, or automatic.  It has dit and dah memories, that
can be turned on or off. It will run off of either 115 V AC, or 
off of 13 V DC.  Sidetone is built in. The original KR-50 had 
paddles built in to it, but this one has had the paddles 
removed (most people did not like the internal paddles 
anyhow).  There is a 1/4 inch stereo jack added so that 
you can use your own paddles, such as a set of Bencher 
paddles, or whatever you like.  It works great, and 
cosmetically, it is in good shape, except for the removal 
of the paddles.  $30


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@speakeasy.net or W8EK@arrl.net
Voice Phone  (352) 732-8400 









_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Many TenTec items FS, Ken Simpson, W8EK <=