Hi Dave,
Congradulations, that is one of the best Radios of the 80s, If everything
is working properly, it will outperform many of the current $800 radios
today, especially with the optional filters ( which are still available
and often you see them here on the reflector for 60 or 70 bucks. )
If it does transmit on the other bands, then there is no upgrade path, (
the upgrade kits are not available anymore ).
Best thing is to enjoy the radio, then when you are ready upgrade.
Best wishes,
Rich
K5SF
From: "Dave" <frstbaptistchurch@wyoming.com>
Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
To: tentec@contesting.com
Subject: [TenTec] Old Omni/30 mtrs
Date: Wed, 20 Jul 2005 20:36:55 -0600
Hi, am new proud owner of an early Omni D, series B that I picked up
at WY state convetion for $50..... it has receive only on 30 mtrs..
nothing in the manual about enabling transmit for 30 mtrs... how do I
enable 30 mtr xmit?
thought I would check with the wider family before bothering the
friends in Sevierville
Dave
K8BBM
RockSprings, WY
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|