On 7/31/05 11:20 PM, "Aidehua@aol.com" <Aidehua@aol.com> wrote:
> Would very much like to get these. Any suggestions appreciated.
>
> Thanks,
> Ed NI6S
Hi Ed,
I'm in the process of selling some Ten-Tec equipment to another ham and he
does not want the rack adapters, so I have adapters for the 253 tuner, the
Omni V/VI-series transceiver, and also a set for the Titan linear. Also, I
have one single-unit flat panel with the TT logo and one without a logo.
These are used to provide needed clearance between racked items.
In addition, I have a 19-inch rack that is 21 inches high, grey in color to
match the TT gear, with rounded corners and a hinged perforated top to
provide good air flow for the tubes in a linear mounted at the top of the
rack. There are holes in the right side for mounting a low-pass filter and a
dummy load, and reinforced handles on each side.
If your interested in any of them let me know. I don't have the cost data
handy, but in the meantime I'll figure out some reasonable prices for these
items.
Gus Hansen
KB0YH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|