Ken Simpson, W8EK wrote:
>TenTec items For Sale:
>
>TenTec 1140 magnetic circuit breaker kit
>This includes the special fast acting circuit breaker,
>and the 4 pin plug needed. It is used for most of the
>100 watt output TenTec rigs, when using a non-TenTec
>power supply, or from a battery. It is needed to protect
>the finals, and is very fast acting. This appears to be
>unused, still in the bag, with paper work for $20.
>
>TenTec 215 desk microphone
>This is the "banana" mic with stand, that was used on
>the earlier TenTec equipment. It is a Hi Z microphone.
>Actually, this is earlier than the TenTec 215, in that it says
>"Model 729 SR ceramic" on the mic, and "Model 417" on
>the stand, with the EV address. As most of you know, Al
>Kahn who started TenTec was CEO of EV, and brought
>the mic design with him to TenTec. This one is the grayish
>color, and would be a great match for the Triton IV (540 and
>544) series, but will work well where ever a Hi Z mic is
>needed. With paper work for $55.
>
>TenTec 705 desk microphone
>This electret desk mic has the 4 pin connector,
>with PTT and "hold" buttons. It works great, and
>looks like new. With paper work for $75.
>
>TenTec 255 Deluxe Power Supply
>Matches the early Omni series, and includes ammeter
>and speaker, and trim ring. Dual pass transistors similar
>to the heavy duty 280 power supply. Good for 20 amps
>at 13 V DC. This one looks fine, and works the same.
>With manual for $ 145.
>
>Prices do not include shipping from Florida.
>
>Thanks.
>
>73,
>
>Ken, W8EK
>
>Ken Simpson
>E-mail to W8EK@speakeasy.net or W8EK@arrl.net
>Voice Phone (352) 732-8400
>
>
>
>
>
>
>
>
>
>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
Hi Ken,
By any chance, do you still have the circuit breaker?
Thanks,
Bill
AB4KH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|