Paul:
Would you happen to have any parts from the 255 powersupply?? I am in need
of a Pass Transistor board. Someone butchered the one that I bought with a
verrrry hot soldering iron and burnt holes in it. The traces are now
flopping in the wind.
Thanks for your time in reading this.
Best Regards,
Ralph Howes
W8BVH
----- Original Message -----
From: "Paul DeWitte K9OT" <k9ot@mhtc.net>
To: <tentec@contesting.com>
Sent: Saturday, October 01, 2005 8:02 AM
Subject: [TenTec] 255 power supply hum
> Steve I have/had a 255 power supply that came with my Omni C. It had a hum
> sometimes. I found that the control board that stands vertical was
sometimes
> the problem. It must be grounded to the chasis very well. You might also
> check if the transformer is fastened tight.
>
> After the control board went up in smoke I gave up on it and now use
Astron
> SS30M supplies for all of my radios.
>
> Hope to see you on 160m this winter
>
> 73 Paul K9OT
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.9/116 - Release Date: 9/30/05
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|