Steve,
Sounds like you need a PTO rebuild.. the old grease in there has hardened
and is most likely causing your problem. Ten Tec will rebuild it for you,
or they will sell you a rebuild kit for about $25 or so and you can do it
yourself. I've done them in the past, it is not real hard to do.. Heard lots
of activity in the OC contest this morning from your direction.. :)
Good Luck
Tim
Nz8J
----- Original Message -----
From: "Steve Ireland" <vk6vz@arach.net.au>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Saturday, October 08, 2005 7:46 AM
Subject: [TenTec] PTO on the Omni C
> G'day
>
> I was tuning around on my Omni C last night - which has been working
> beautifully - and the CW signals I was tuning in started to sound like
> Russian Klub stations - with a pronounced chirp on them. If I wiggled the
> PTO dial or tuned it rapidly off frequency and tuned it back, the signals
> sometimes returned to a clean sharp note with no chirp.
>
> Please can anyone tell me what is happening - and (even better) what is
the
> cure?
>
> Thanks, blokes!
>
> Vy 73
>
> Steve, VK6VZ
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.11.13/124 - Release Date: 7/10/2005
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|