Re: [TenTec] Does VOX work from the AUX input on the Orion?

[Jim Bobo <jimbobo@gvtc.com>]

NZ8J wrote:
> I hooked up my Signal Link SL1+ and used the PTT output on it to key the
> Orion.. everything works fine now... still like to know if the vox is
> supposed to work with the aux input...
> 73
> Tim
> NZ8J
> ----- Original Message -----
> From: "NZ8J" <nz8j@woh.rr.com>
> To: <TenTec@contesting.com>
> Sent: Saturday, November 05, 2005 10:59 AM
> Subject: [TenTec] Does VOX work from the AUX input on the Orion?
>
>
>
> > I'm trying to use the Orion aux input (DIN jack)  on the back to work the
> > digital modes, does the vox work like it does on the Argo V or do you need
> > the PTT line activated?  I can't seem to get it to key using vox using the
> > aux input.. The same setup on my Argo V works fine using vox. I just
> unplug
>
> > it from the Argo V and plug it into the Orion and it won't key.. I have
> set
>
> > the input to "aux" and adjusted the input gain, made sure I tried both
> > channels, etc.... but no luck... probably doing something wrong .....any
> > ideas??...
> > Thanks
> > Tim
> > NZ8J
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
Yes - it does for me