TenTec
[Top] [All Lists]

[TenTec] O2 RF gain and AGC threshold

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: [TenTec] O2 RF gain and AGC threshold
From: "Ken Waites" <BARBIEKENW@peoplepc.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 13 Jan 2006 23:32:15 -0600
List-post: <mailto:tentec@contesting.com>
To be more correct, I should have asked it release 2.28 for the O2 has rf gain 
controlling AGC threshold to some extent.

If it does, then AGC threshold set from the menu would only apply if  RF gain 
is 100.

Maybe the future outboard attachments  will display
- AGC  threshold setting compared to MDS graphical, as it varies with RF gain 
and AGC threshold settings,   
- show some kind of tuning information such as showing what signals  are under 
the "roof crystal", and 
- how things like NR, NF, etc have affected the noise floor  and amplitude of 
signals in the bandpass.

Takeoffs from such things as the waterfall digital ops have seen from  MIXW, 
etc. shaped to the roofing filter ---------=


The imagination goes wild .....  
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>