Many thanks, Bill....Appreciate your comments.
You're right...73's Joe, KX4JR
At 12:48 PM 02/09/2006, you wrote:
>W4CAK:
>
> >Alas, both the O2 and the 2.0 firmware for the old Orion have the s meter
>working like it does in the foreign imports. The lower the RF gain the
>higher the s meter will be stuck.
>
> >Change is inevitable, but don't like this one.
>
> Toby, you mean you don't like Collins,Hammarlund,
>Hallicrafters, Drake, etc? It's
>how S-meters and RF Gain controls have worked
>for at least 60 years! This wasn't invented
>by "foreign imports", it's simply the result
>of how the S-meter interacted with RF Gain
>in analog rigs.
>
> The "change" was when Ten-Tec decoupled
>the two in Orion. I feel this will make it
>much easier for people to set RF Gain correctly
>(the same ones who now complain about Orion
>being "noisy" because they don't know how to
>set RF Gain properly). Instead of setting Gain
>by ear, now they can set it by simply adjusting
>the S-meter deflection to be slightly above
>noise peaks. What could be simpler?
>
> Actually Sinisa YT1NT first suggested
>this in his March 2004 white paper when so
>many folks could not figure out how to set
>AGC Threshold correctly. I think this is
>actually a good move making Orion much easier
>to use.
>
> 73, Bill W4ZV
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|