Hello Ten-tec techies, I need some help!!
I have a 262G power supply that I just got with a Triton IV.
I am getting distorted SSB transmit reports when I turn the ALC up all the way
on all bands. It is fine when I put the ALC at about 50%.
The voltage out of the supply is 12.95 volts on receive. In transmit with 50%
ALC it drops to 12.5 to 12.67 volts, and at 100% ALC it goes to 12.24 to 12.35,
depending on band. I am testing into a 50 ohm dummy load. What do you think??
Thank you for your help in advance.
Dan N5NBK
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|