Dave, if you wish to make your own try the following:
isolation transformer in series with a 50Kohm volume control. i used that
system with an Icom 756 for years. the volume control is to set the gain.
isolation transformers were from Radio Shack.
cheap! but no fancy circuits.
jack ak7o
----- Original Message -----
From: "dave dabay" <kd3pc@cox.net>
To: <tentec@contesting.com>
Sent: Friday, March 10, 2006 8:41 AM
Subject: [TenTec] wanted rig blaster or other interface for digital modes
Guys and Gals
Looking for a rigblaster, microham, or rascal type interface to give the
digital modes a start. I have an OMNI-VI, v.3 to use...
Prefer used until I know this is a way I want to go. Don't really need
the
high end stuff at this time.
Thanks for listening. replies to kd3pc at arrl.net, as to not burden the
list.
dave
dave dabay
KD3PC
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.2.1/278 - Release Date: 3/9/2006
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|