TenTec
[Top] [All Lists]

Re: [TenTec] Roof filters (N4PY and KC9CDT)

To: tentec@contesting.com
Subject: Re: [TenTec] Roof filters (N4PY and KC9CDT)
From: Kc9cdt@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 15 Mar 2006 11:31:11 EST
List-post: <mailto:tentec@contesting.com>
Bill,
Yes, I found that out some time ago, as a matter of fact I beleive Grant told 
me that way back because I complained of the sound being 'Not Crisp'. Bill, 
Thanks for the reminder!

Now I almost always leave PBT at 140-170. Also I have noticed with V2 that if 
you are using NR, set PBT at 180-240 (seems to help a little in audio)

Also, Have you noticed that at the same freq (I tested 20mtrs USB)....on the 
SUB RX (V2) you have to use a -400 or so to get the sound the same as on Main 
Rx with a setting of 0 or so (these are aprox numbers). The PBT does appear on 
the screen to work the same in Main and SUB but IT DOES NOT.

Where's Doug Smith when you need him!!!
AND THEY NEED HIM!

73,
Lee, KC9CDT
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>