TenTec
[Top] [All Lists]

Re: [TenTec] Orion Aux Audio output (explained)

To: tentec@contesting.com
Subject: Re: [TenTec] Orion Aux Audio output (explained)
From: Mike Gorniak <mgorniak@genesiswireless.us>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 28 Mar 2006 12:07:30 -0600
List-post: <mailto:tentec@contesting.com>
Larry, I agree with you in principle. However, I must add an anecdote that 
illustrates the problem in the real world:

I once worked for a radio station that had a sound system that they used at various remote broadcasts and other events that required a PA system. For some reason, the Chief Engineer had chosen good old fashioned AC Plugs and modified extension cords as the interconnects. The results were eminently predictable. The CE received a phone call from an intern who was working an event. It seems that every one of the loudspeakers had the same fault...he'd plug it in, briefly hear a very loud hum, and then the speaker would belch black smoke. As I recall, he did that with 4 600 dollar loudspeakers before bothering to call anyone.
Now, who is responsible? The CE or the intern? Or both?

73,

Mike
NM7X


------------------------------


Date: Tue, 28 Mar 2006 09:38:18 -0600
From: "Larry Menzel" <retire@means.net>
Subject: Re: [TenTec] Orion Aux Audio output (explained)
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>

Yes, I must admit to several "gozinta" errors while getting to know my Orions. None fatal, however, thus far.

RANT ON:

But you know, as I look at my amplifiers, my oscilloscope, my audio gear, my sig-gen, all have common ports for many functions, any one of which, misaligned, will yield faulty results. Let's put any blame for mis-plugged plugs directly where it belongs: On the Operator!

Wouldn't it be nice, a kinda kindergarten thing, to have every port color coded, and different shaped so we can be protected from oursleves, huh? But, guys, were big boys and girls now, and we should be aware enough to make SURE the plug is in the right hole before proceeding. A quick check, even if it's with a mirror if you can't get to the back of the rig, should be SOP when interconnecting devices. Let's not blame the tools, eh?

This is a serious radio for serious applications and operators. It's not a toy with non-functional or multipurpose plugs. WE get to decide what we want the radio to do, and we have to be able to figure that out AND take responsibility for our own errors in judgement or execution.

No offense, guys, but we got what we paid for. I love the phase, Bob, "performance outweighs warts" if you want to call them that.

RANT OFF:

Larry, N0XB


<Prev in Thread] Current Thread [Next in Thread>