This may be the problem we are seeing in 2.037j with the new AGC scheme. I
found that using the slowest recovery times for each AGC setting and adding
some 'hang' fixed it. Try .21 s for slow, .17 for med and .04 for fast.
Ron N6AHA
----- Original Message -----
From: "Dick Green WC1M" <wc1m@msn.com>
To: "Ten Tec Reflector" <tentec@contesting.com>; "Orion Yahoo Group"
<orion565@yahoogroups.com>
Sent: Monday, September 11, 2006 12:20 PM
Subject: [TenTec] 2.059d: CW audio distortion in right headphone
In 2.059d, there's a distinct clicking in the right headphone on received
audio peaks in CW mode. This is true for both received signals and noise.
The clicking is not present in the left headphone. It is not affected by
the
AGC slope setting and is not present in V1.
73, Dick WC1M
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|