Mike,
I'm curious. What is the theory behind this approach ? I'm always
interested to learn more approaches to grounding.
Gary
----- Original Message -----
From: "Mike Gorniak" <mgorniak@genesiswireless.us>
To: <tentec@contesting.com>
Sent: Monday, October 16, 2006 11:39 AM
Subject: Re: [TenTec] TenTec Digest, Vol 46, Issue 45
> Hi John,
>
> If you are going to run that wire down to a ground rod, you might try
> using coax instead. Attach the center conductor Only at the rig end, and
> connect Both the shield And the center conductor at the ground rod end.
> Another variation is to connect the center conductor Only at both the
> rig and ground rod ends, and then use a .1 or .01 mfd. capacitor to
> connect between the shield and the Center conductor at the ground rod
> end, or both ends.
>
> When I had my ham shack on the second floor, this configuration worked
> for me.
>
> Good Luck, and please let us know of your progress!
>
> 73,
>
> Mike
> NM7X
>
> ------------------------------
>
> Message: 3
> Date: Sun, 15 Oct 2006 12:49:10 -0400
> From: "John K Gotwals" <john@gotwals.com>
> Subject: [TenTec] Orion and RF Feedback
> To: <tentec@contesting.com>
>
> Ray, many thanks for your comments. I have already found that touching the
> mike makes a difference, although that may just be the symptom of a more
> serious grounding problem at this end. Radioworks
> http://radioworks.com/nbgnd.html has an illuminating discussion of ground
> problems, and my next step is to drill another hole through the window
sill
> and run a wire down a story and a half to a ground rod. In addition I will
> try a counterpoise consisting of a 1/4 wavelength (at 40 meters) piece of
> hookup wire strung down the hall to determine its affect on my problem.
> W2DU
> choke filters between the Matchbox and amplifier and between the amplifier
> and Orion appear to have helped lessen the problem.
>
> John, N9JG
>
> ---------------------------------------------
> This message has been scanned for viruses and dangerous
> content by Genesis Wireless, and is believed to be clean.
> Please call (320) 396-2990 with any questions or concerns.
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|