TenTec
[Top] [All Lists]

Re: [TenTec] Have questions

To: tentec@contesting.com
Subject: Re: [TenTec] Have questions
From: jamesmozzillo@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 22 Oct 2006 21:40:21 -0400
List-post: <mailto:tentec@contesting.com>
Hi John (KB2HUK):
 
I do not agree with putting in an Inrad filter at the 1.8 position. I am 
assuming that the 1.8 position is the 1st intermediate frequency of the 
receiver. The reality is it is a trade off. By not limiting the bandwidth near 
the input of the radio, you are allowing your front end to be overloaded when a 
high power signal is nearby. To compensate for this, you can use a broad band 
roofing filter say for 6 or 8 KHz which is plenty wide and would minimally 
reduce sensitivity if at all. But if the ham "down the road" turns on his high 
power linear 300 Hz away from the signal you are working on CW a narrow roofing 
filter will prevent the front end of your receiver from overloading. Yes you 
have reduced your sensitivity a bit but you can probably dig the signal out 
just fine. If you put the filter in the next stage of the reciever, you will 
overload your fron end and your AGC will be overloaded and reduce your 
sensitivity anyway.
 
The engineers at TenTec have thought of this and designed the Orion 
accordingly. Now Icom and Yaesu have announced that they have put in roofing 
filters in the high priced rigs. Why? Think about this please.
 
Sincerely,
 
Jim
NC9J 
 
 
-----Original Message-----
From: brazos@rochester.rr.com
To: tentec@contesting.com
Sent: Sun, 22 Oct 2006 4:51 PM
Subject: [TenTec] Have questions


Hello , I am currently saving for a nice Orion 1 .  I am tiring to get a handle 
on what to look for on the used market.  I have heard that a radio with all the 
 
optional roofing filters installed actually desensitizes the radio and may not 
be any kind of an advantage , and that the slick operator puts in a Inrad 
filter 
at the 1.8 position and this allows closer in sensitivity ?  can you advise?  
Am 
I close ?   soooooooo confused !   thanks  John kb2huk  
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
________________________________________________________________________
Check out the new AOL.  Most comprehensive set of free safety and security 
tools, free access to millions of high-quality videos from across the web, free 
AOL Mail and more.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>