The EXT SPKR (Reference (78) in 566 manual), when connected with a standard
1/4" phone plug, the internal speaker in the ORION II is disabled. Tip of
the plug is audio. Sleeve is ground. I have used mine to connect an old
SKYTEC Model CW-1 (Speaker - 750 Hz) successfully.
http://radio.tentec.com/cms-files/566_manual_initial_version.pdf
----- Original Message -----
From: "Lee Armitage" <LEE@GJ.NET>
To: "Ten Tec List" <tentec@contesting.com>
Sent: Sunday, January 07, 2007 2:19 PM
Subject: [TenTec] Mono plug into rear EXT SPKR Orion II
I want to plug into the rear EXT SPKR jack of my Orion II when it arrives
with a mono 1/4 inch plug to feed the Timewave 599zx.
Using this rear speaker outlet, EXT SPKR. will it be acceptable to use a
1/4 inch mono plug or do I need to use a 1/4 inch stereo plug using only
the tip and base with nothing connected to the ring of the stereo plug.
Many thanks and 73,
Lee Armitage N0LYW
970-234-8989
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
__________ NOD32 1.1836 (20061026) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
|