Hi Fred
A very versatile unit but at $159 it would be an expensive solution for
someone just wanting to interface an Orion to a Yaesu amp.
For a few cents, a 74LS147 or similar 10 to 4 line encoder will convert the
Orion band data output to BCD, providing Yaesu compatibility.
Soldering iron competence is required however ;-)
73
Bob, 5B4AGN
----- Original Message -----
From: "Fred Handscombe" <fredch@homeshack.freeserve.co.uk>
To: <tentec@contesting.com>
Sent: Sunday, February 04, 2007 9:19 AM
Subject: [TenTec] Ten Tec and Tokio High power amp interfacing
> Hello All
>
> Elecraft make a device which will interface between most of the common
> rigs
> (Y, I, K, E)
>
> Its called the KRC-2, from the web site www.elecraft.com "Our products"
>
> The Elecraft KRC2 Band Decoder is a universal, programmable station
> control
> unit that can switch any combination of antennas, filters, amplifiers, or
> other equipment. It supports analog, digital, and RS232 control inputs, so
> it's compatible with transceivers from Icom (voltage level), Yaesu (BCD
> and
> voltage level), and Kenwood (serial or BCD via logging program), as well
> as
> Elecraft's own K2 and K2/100.
>
> I am pretty sure it will interface the Orion to a Yaesu BCD command
>
> Elecraft publish all the manuals on the web so you can study them
>
> Its quite a useful box that Elecraft seem to keep quiet about
>
> 73 Fred
> G4BWP
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|