TenTec
[Top] [All Lists]

[TenTec] Orion 2.060b Aux Audio Output down quite a bit

To: <tentec@contesting.com>
Subject: [TenTec] Orion 2.060b Aux Audio Output down quite a bit
From: "Merle Bone" <merlebone@charter.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 26 Apr 2007 23:00:12 -0500
List-post: <mailto:tentec@contesting.com>
Duane (AC5AA) wrote:
"I don't know if others are noticing this too, but the audio output of the
Orion's 8-pin DIN rear connector seems to be down quite a bit from the last
version of the FW. "
--------------------------------------------------------------------------------------------------------------
Duane, I think the audio change you are referring to  has to do with the gain 
taken out of the Orion V2 code in the previous release V2.059. It is a bit of 
an issue in the Orion because the Orion doesn't have the separate output 
amplifier that was put into the Orion II (Thus the menu item in the OIIs that 
doesn't exist in the Orion). It also effects the line out audio level. To 
compensate for the line level change, I changed out the sound card I use for 
digital mode and was able to get enough gain that I don't have to use the 
microphone input on the soundcard (Other problems with hum can easily develop 
when you go to the microphone input). Because there were so many problems with 
the earlier V2.059 release I just went back to V1.373b5. 

However, this release, V2.060b, has really made significant strides towards 
high performance operation with full stability and some useful new features. I 
have stayed with this release and am thinking it may become my new standard 
operating release. I have communicated a few issues to Ten-Tec Engineering that 
I would still like to see addressed in the future.

Just a word of thanks to all of those that "saw problems" with the earlier 
releases and raised them here and in notes to Ten-Tec. Sometimes that is 
"awkward" on this forum as some seem confident that there are "no problems." As 
someone else said to me recently, TenTec does listen to the comments here, and 
through other channels, and continues to respond with improved products. This 
release fixed a lot of issues - many more then are listed in the fix notes. 
Thanks TEN-TEC!!
73, Merle - W0EWM
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Orion 2.060b Aux Audio Output down quite a bit, Merle Bone <=