John,
For what it's worth, the AN and NOTCH controls on at least one Orion
software version work well. When I tune to 7.251, my Orion 2 running Version
2.037j
takes out the heterodyne from 7.250 very well.
There must be something quirky in the rig or the software version.
I know this doesn't directly help you (and I surely don't want to appear to
be gloating), but you can tell Ten Tec that your notch functionality is poor
compared to other Ten Tec users'.
73 and GL with the problem.
Bernie
In a message dated 5/25/2007 8:43:27 P.M. Central Daylight Time,
W3GQJ@embarqmail.com writes:
Grant,
I tried the AN on 7.251 since I knew that there was a foreign broadcast
station as 7.250. Neither the AN nor the NOTCH had any effect. I then
tuned the dial to be sure that I needed 1000Hz for the manual notch. When I
came back to 7.251, both the AN and NOTCH worked! I am going to have to see
if I can find a pattern and if so, I will send it to Ten-Tec.
John
************************************** See what's free at http://www.aol.com.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|