I have a Corsair II which has developed a no S-Meter reading (meter needle
stays on "0") when the meter switch is Ic position during receive. When the
meter switch is in the SWR, FWD, or Process positions normal S-Meter readings
are indicated during receive. All other meter functions including Ic during
transmit are normal.
Any ideas on the problem, failed component, remediation? Thanks!
Best regards,
Gary - AB9M
CSM(r) G.L.Huber
9679 Heron Bay Road
Bloomington, Illinois 61704
(309)662-0604
www.csm-gh.com<http://www.csm-gh.com/>
csm-gh@www.csm-gh.com<mailto:csm-gh@www.csm-gh.com>
gary.huber@us.army.mil<mailto:gary.huber@us.army.mil>
ab9m@arrl.net<mailto:ab9m@arrl.net>
www.csm-gh.com/mytrike.htm<http://www.csm-gh.com/mytrike.htm>
www.csm-gh.com/75thRepoDepo.htm<http://www.csm-gh.com/75thRepoDepo.htm>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|