Philip Leonard WVØT wrote:
> Tod Glenn wrote:
>> On Jul 10, 2007, at 7:19 AM, Philip Leonard WVØT wrote:
>>
>>> I have an Omni VI opt3 and I am trying to use it with MixW but I can't
>>> get MixW to key the radio. I can change the frequency via MixW but no
>>> luck getting PTT to work. I have MixW set for an IC-735. I have tried
>>> to use Ham Radio Deluxe but with the same result. I am using the Omni's
>>> serial interface. What am I missing? Or is there something wrong in
>>> the Omni?
>>>
>>> Also, does anyone have the hex strings to select the various filters in
>>> the Omni via serial control?
>>
>> I have yet to make any kind of connection between my Omni 6 Opt3 and my
>> computer. Care to share the secret? I've tried the serial port and the
>> CI-V port with every cable combination imaginable. What sort of cable
>> are you using?
>> ----
>> Tod Glenn
>> N7WD
>
> Tod,
>
> I using a normal 9-pin to 25-pin serial cable from the PC to the Omni
> VI. I think it is a "cross-over" cable but I'm not sure on that. I can
> check if you wish. I have mine set to 19200bps, 8 data bits, 1 stop
> bit. You also need to set the software up for an Icom IC-735. I've
> read that IC-703 may work also but I have not tried it.
>
> Philip
Cross over (null) cable will not work. A straight thru 9 to 25 is all
that is needed
Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|