Talk to TenTec, they will tell you what you / or they will have to do. They
told me to remove the PLL board and carefully re-solder all connections you
can get at. If you are not comfortable with that send it to them and they
will do it for a COST ! Mine has worked well ever since I did mine.
Walt K8CV Royal Oak, MI.
----- Original Message -----
From: "john ferro" <foxbat426@hotmail.com>
To: <tentec@contesting.com>
Sent: Monday, September 03, 2007 11:29 PM
Subject: [TenTec] paragon pll problem
> i'm about to take a chance on a paragon - it's in good shape, but the
> owner
> tells me it goes out of lock above 20 mhz. has anyone seen this specific
> problem? - its interesting to me that the problem only occurs above 20
> mhz -
> any ideas would be appreciated. TIA, john
>
> _________________________________________________________________
> Share your special parenting moments!
> http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|