TenTec
[Top] [All Lists]

Re: [TenTec] Argo 509 mic

To: gsm@mendelson.com,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Argo 509 mic
From: "Paul Gates, KD3JF" <pearly732003@yahoo.com>
Reply-to: kd3jf@arrl.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 27 Nov 2007 06:39:08 -0800 (PST)
List-post: <mailto:tentec@contesting.com>
Astatic 10D or D-104 is what I used on my 509.
Paul Gates, KD3JF

"Geoffrey S. Mendelson" <gsm@mendelson.com> wrote: On Tue, Nov 27, 2007 at 
09:22:14AM -0500, nf7v@cox.net wrote:
> Hello all,
> I have just aquired an Argonaut 509 and I need a mic for it.
> What recomendations do some of you have, and is something with an equalizer 
> going to get through a bit better then a standard mic?

Almost anything that will work with a high impedance rig will do. I've
used a 10-DA, D104, tentec dynamic mic, and an old radio shack CD
dynamic mike with good results.

Note the wiring carefully, it's a stereo 1/4" headphone plug
with one wire ground, one audio and one PTT.

Geoff.

-- 
Geoffrey S. Mendelson, Jerusalem, Israel gsm@mendelson.com  N3OWJ/4X1GM
IL Voice: (07)-7424-1667 U.S. Voice: 1-215-821-1838 
Visit my 'blog at http://geoffstechno.livejournal.com/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>