The problem with the NTE replacement is that two of the tabs are turned 90
degrees and won't fit the PC board slots. Some of the other mfrs are same
way.
Phil Chambley, Sr.
k4dpk
----- Original Message -----
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
To: <tentec@contesting.com>
Sent: Tuesday, January 01, 2008 6:06 PM
Subject: Re: [TenTec] 962 Power supply Bridge rectifier needed
> On Tue, 2008-01-01 at 16:48 -0500, Lew wrote:
>> Thanks again for the info. A few have said the part is available but no
>> one
>> seems to know the brand or part number? If anyone remembers it would be
>> great. Happy New Year again to everyone! Lew-KlNDV
>>
> Is there a part number on the part? What's it look like? Most 30 amp
> bridges are in a square aluminum package or molded package with
> terminals in the four corners sticking out perpendicular to the plane of
> the heatsink. Practically made by everybody in power diodes as a
> commodity item. Take a look at the Mouser catalog number 583-MP351 for
> an example of that. Or a 625-GBPC3501W-E4
>
> Or google NTE Electronics and use their cross reference with the part
> you find. Mouser will sell you the NTE part too.
>
> 73, Jerry, K0CQ
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|