Re: [TenTec] Omni V Maximum voltage

["Stuart Rohre" <rohre@arlut.utexas.edu>]

An old time repeater and two way guy I know is going to check his records, 
but he said to make sure the Micor is not a magnetically regulated 
transformer.  IF it is, it would have a capacitor of high voltage across the 
transformer winding.

Certainly the diodes in series will work; the bucking filament transformer 
might work.  You would use half of the center tapped 6.3 VAC transformer in 
series with the primary of the Micor, and its primary on the AC line.  The 
current rating must be equal or greater than the primary current of the 
Micor.

-Stuart
K5KVH