Jerry,
Thanks for the advice. I knew there must be a good reason that I liked the
sound of filters with less aggressive skirts.
Probably in my case the filter blow-by is what needs to be corrected.
Perhaps some better shielding or grounding would help. If that does not
work I will try another tandem 4 pole filter as suggested by Clark -WA3JPG
73,
Bill - K6WLM
----- Original Message -----
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
To: <tentec@contesting.com>
Sent: Wednesday, February 13, 2008 12:34 PM
Subject: Re: [TenTec] Argonaut 509/515 Filter Question
> On Wed, 2008-02-13 at 12:20 -0800, Bill Miner wrote:
>> Has anyone replaced the stock filters with any of the Inrad units? How
>> did
>> the new filters work and how much trouble was it to wire the Inrads into
>> the
>> Ten Tec rig?
>>
>> The stock filters seem to have very wide skirts or filter blow-by or
>> maybe
>> both.
>>
>> Thanks for any advice that you may have.
>>
>> 73,
>> Bill - K6WLM
>>
>
> Less aggressive skirts make for lot better time response so lightning
> sounds like clicks instead of crashes. And you can year signals between
> the clicks.
>
> 73, Jerry, K0CQ
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|