TenTec
[Top] [All Lists]

Re: [TenTec] OMNI VI Chirp Report

To: <tentec@contesting.com>
Subject: Re: [TenTec] OMNI VI Chirp Report
From: Dennis Ashworth <K7FL@arrl.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 18 Feb 2008 19:16:03 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Could it be the PTT going out of lock momentarily? That makes a kind 
of "blurp" sound.
In my case it was limited to a single band.
Dennis, K7FL

==

At 07:09 PM 2/18/2008, you wrote:

> >  I would not call it chirp. I do not hear a change in frequency 
> across the cw dot or dash. I do not like the sound of what I hear. 
> It does not have a clear musical sound that I would like to hear. 
> Also, I would like the keying to be a bit sharper, that is, I would 
> like the leading edge to rise a bit faster.
> >
>Of course you want to like what you hear. At this point, since you don't
>like it, I think you should be looking for a way to find out what it
>really is doing. If you have determined there is not a frequency change,
>then there must be something about the shape of the amplitude envelope
>that is not right. I think you should find an oscilloscope and look at
>the envelope. Then if changes you make to the rig improve what you hear,
>you'll be able to tell us what the difference is.
>
>DE N6KB
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.516 / Virus Database: 269.20.7/1285 - Release Date: 
>2/18/2008 5:50 AM

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>