First, try the various resets beginning with a master reset.
73, Duane. AC5AA
Sent from my iPod
Duane C.
On Mar 2, 2008, at 10:08 AM, "Bill Axelrod" <bill@axelrods.org> wrote:
Help please.
I have a brand new (one month old) Orion II which was working
fine until this morning. When I came down and turned the rig on it
looked fine. But I can not hear any signals on any band with the
main receiver. And when I try to transmit I get no power out at all.
The transceiver keys, I hear the side tone, but it does not
deliver any power. Same when I hit the tune button.
Same problem with either vfo. And same problem with antenna 1
or 2. The sub receiver seems to work OK. The transmitter is NOT
disabled in the TX menu.
Any thoughts on what I should look for or at? Is there a button
or switch I may have inadvertently thrown?
I have disconnected all the ancillary equipment and have a dummy
load connected directly to the antenna 1 connector.
Thanks and 73... Bill K3WA
[Non-text portions of this message have been removed]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/orion565/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/orion565/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:orion565-digest@yahoogroups.com
mailto:orion565-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
orion565-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|