OM Kam taught me the following and it works GREAT>>>>> de HS0ZCW
NOTES ON ORION ONE from Kam N3KS, May 2008
CUT and PBT/BW buttons:
+CUT: on usb or cw, use H.
on lsb use L.
Use CUT to adjust the BW (not BW knob).
+PBT: Always on PBT (not BW ever).
SETTINGS by Menu
+RX Menu:
-"PBT track" on.
-"BW Track" on
-"Hardware NB" to off.
-"PBT/BW Step" to +10.
+SSB Menu:
-4
-3000
-200 to 300
-BOTH
+AUDIO button:
-TX EQ to -14 to -20 (gives more highs)
-RX EQ to -11 (gives more highs)
-Sub EQ to -8 (gives more highs).
+STEP at 10 or 100
+SP in speech processor to 6 or 8.
Charles Harpole HS0ZCW
k4vud@hotmail.com
> From: brazos@rochester.rr.com
> To: tentec@contesting.com
> Date: Fri, 16 May 2008 17:33:34 -0400
> Subject: [TenTec] PBT and hi low cut
>
> Hello I was on the air today with my Orion II and I was getting some
> interference from a nearby station I tighten up the band pass filter and
> started playing with the PBT and hi - lo cut . I realized that I still don't
> understand the operation of these controls to move the offending stations or
> move away from this station. I fiddled with these controls and was unable to
> remove the offending station the controls seemed to do very little if
> anything . Is there a good explanation of how to use these controls some
> where . One question , do I have to have the pbt light on before I attempt to
> use the H or L cut feature ? Thanks John kb2huk
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 1889 spam emails to date.
> Paying users do not have this message in their emails.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|