Jim:
I don't think there is a part number since this was a special mod that TT
did in the factory by putting grommets between the motor and the squirrel
cage housing, and they don't have any more available. My fan was getting
noisy, too, so I took it all apart and replaced the grommets, including the
ones on the mounts, with a bunch from an assortment pack from Radio Shack.
I also replaced the foam where the manifold from the fan inserts into the
tube socket compartment. It's much quieter now.
Ron N6IE
www.N6IE.com
----- Original Message -----
From: "Jim Brown K9YC" <k9yc@audiosystemsgroup.com>
To: "Ten Tec List" <tentec@contesting.com>
Sent: Thursday, September 04, 2008 9:39 AM
Subject: [TenTec] Fan For Titan 425
The fan in the oldest of my three Titan 425s (the original Titan) is
a lot noisier than the others, so I'm thinking of a replacement. Does
anyone know of a part number that might replace it?
73,
Jim K9Y
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|